|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN7040 MCH6608 N-Channel Silicon MOSFET MCH6608 Ultrahigh-Speed Switching Applications Preliminary Features * * * * Package Dimensions Low ON-resistance. unit : mm Ultrahigh-speed switching. 2173A 2.5V drive. Composite type with 2 MOSFETs contained in a single package, facilitaing high-density mounting. 0.25 2.1 1.6 [MCH6608] 0.3 0.15 4 5 6 0.25 32 0.65 2.0 0.07 1 6 5 4 0.85 1 : Source1 2 : Gate1 3 : Drain2 4 : Source2 5 : Gate2 6 : Drain1 SANYO : MCPH6 Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm 2!0.8mm)1unit Conditions 1 2 3 Ratings 30 10 0.65 2.6 0.8 150 --55 to +150 Unit V V A A W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Conditions ID=1mA, VGS=0 VDS=30V, VGS=0 VGS=8V, VDS=0 VDS=10V, ID=100A VDS=10V, ID=150mA ID=150mA, VGS=4V ID=80mA, VGS=2.5V ID=10mA, VGS=1.5V Ratings min 30 10 10 0.4 400 560 0.9 1.2 2.6 1.2 1.7 5.2 1.3 typ max Unit V A A V mS Marking : FH Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82201 TS IM TA-2463 No.7040-1/4 MCH6608 Continued from preceding page. Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=10V, VGS=10V, ID=300mA VDS=10V, VGS=10V, ID=300mA VDS=10V, VGS=10V, ID=300mA IS=300mA, VGS=0 Ratings min typ 30 15 10 32 110 250 160 2.34 0.38 0.45 0.8 1.2 max Unit pF pF pF ns ns ns ns nC nC nC V Switching Time Test Circuit VIN 4V 0V VIN ID=150mA RL=100 VOUT VDD=15V Electrical Connection D1 G2 S2 D PW=10s D.C.1% G S1 G1 D2 P.G MCH6608 50 S 0.30 ID -- VDS 4.0V 0.6 ID -- VGS C Ta= --25 3.5 6.0V Drain Current, ID -- A V V 0.20 Drain Current, ID -- A 3.0 2.5 0.4 2.0 V 0.15 VGS=1.5V 0.3 0.10 0.2 0.05 0.1 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0 0.5 1.0 1.5 2.0 2.5 IT00225 Drain-to-Source Voltage, VDS -- V 3.0 IT00224 10 7 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V RDS(on) -- ID Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- 2.5 VGS=4V Static Drain-to-Source On-State Resistance, RDS(on) -- 5 3 2 2.0 Ta=75C 1.0 7 5 3 2 1.5 150mA ID=80mA --25C 25C 1.0 0.5 0 0 1 2 3 4 5 6 7 8 9 10 0.1 0.01 2 3 5 7 0.1 2 3 75 5 7 1.0 IT00227 0.25 0.5 Gate-to-Source Voltage, VGS -- V IT00226 Drain Current, ID -- A No.7040-2/4 C 25 VDS=10V V C MCH6608 10 7 RDS(on) -- ID VGS=2.5V Static Drain-to-Source On-State Resistance, RDS(on) -- 10 RDS(on) -- ID VGS=1.5V Static Drain-to-Source On-State Resistance, RDS(on) -- 5 3 2 7 5 Ta=75C --25C 1.0 7 5 3 2 3 Ta=75C 25C --25C 25C 2 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 1.0 0.001 2 3 5 7 0.01 2 3 Drain Current, ID -- A 3.0 IT00228 10 RDS(on) -- Ta Drain Current, ID -- A yfs -- ID IT00229 Forward Transfer Admittance, yfs -- S 7 5 3 2 VDS=10V Static Drain-to-Source On-State Resistance, RDS(on) -- 2.5 2.0 1.5 1.0 V =2.5 VGS mA, 0 I D=8 =4.0V , V GS 50mA I D=1 1.0 7 5 3 2 --25 Ta= C C 75C 0.5 25 2 3 5 7 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C 1.0 7 5 0.1 0.01 0.1 2 3 5 IT00230 1000 IF -- VSD VGS=0 Switching Time, SW Time -- ns Drain Current, ID -- A 7 1.0 IT00231 SW Time -- ID 7 5 3 2 VDD=15V VGS=4V Forward Current, IF -- A 3 2 td(off) tf Ta=7 5C 25C --25C 0.1 7 5 3 2 100 7 5 tr td(on) 3 2 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 IT00232 10 0.01 2 3 5 7 0.1 2 3 5 IT00233 100 7 5 Ciss, Coss, Crss -- VDS f=1MHz Gate-to-Source Voltage, VGS -- V Diode Forward Voltage, VSD -- V Drain Current, ID -- A 10 9 8 7 6 5 4 3 2 1 VGS -- Qg VDS=10V ID=300mA Ciss, Coss, Crss -- pF 3 2 Ciss Coss 10 7 5 3 2 Crss 1.0 0 5 10 15 20 25 30 IT00234 0 0 0.5 1.0 1.5 2.0 2.5 IT00235 Drain-to-Source Voltage, VDS -- V Total Gate Charge, Qg -- nC No.7040-3/4 MCH6608 5 3 2 ASO 1m 1.0 PD -- Ta s Allowable Power Dissipation, PD -- W IDP=2.6A <10s 0.8 Drain Current, ID -- A 1.0 7 5 3 2 0.1 7 5 3 2 ID=0.65A 10 M ms ou nt DC 10 ed op 0m 0.6 on era s ac er tio am n ic 0.4 bo ar Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board(900mm2!0.8mm)1unit 2 3 5 7 1.0 2 3 5 7 10 2 3 5 d( 90 0m 0.2 m2 !0 .8m m )1 un 0.01 0.1 0 0 20 40 60 80 100 120 140 it 160 Drain-to-Source Voltage, VDS -- V IT03638 Ambient Temperature, Ta -- C IT03637 Note on usage : Since the MCH6608 is designed for high-speed switching applications, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2001. Specifications and information herein are subject to change without notice. PS No.7040-4/4 |
Price & Availability of MCH6608 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |